Adhesive Type Fluororubber
Hardness (Shore A): 60-80
Color: black/color (customized colors are available)
Tensile strength: 18MPa
Operating temperature: -15°C~250°C (short-term up to 300°C)
Features: oil resistance, high temperature weather aging resistance, solvent resistance, acid and alkali resistance and chemical media
Sample: Free sample for testing
MOQ: 1 kg
Advantages: professional manufacturer and high-quality service.
Product Introduction
As a polymer elastomer, fluororubber is divided into three types of fluorine content: high, medium and low. The higher the fluorine content, the stronger the medium resistance of fluororubber. Binary rubber is fluororubber with low fluorine content, but its advantage compared with fluororubber with high fluorine content is that fluororubber with low fluorine content has low compression set performance, so in general, fluororubbers with different fluorine content have their own advantages.
Product Performance:
Aluda adhesive fluoroelastomer is peroxide vulcanized fluoroelastomer, which has excellent adhesion to silicone rubber. Aluda adhesive type fluororubber has fast vulcanization speed, good fluidity, excellent processing performance, acid and alkali corrosion resistance, high temperature, weather, ozone aging resistance, has extremely excellent performance, and is suitable for making adhesive products.
Technical Parameters:
|
Item/Grade |
Test Method |
Performance Index |
||
|
Model |
|
GJ60 |
GJ70 |
GJ80 |
|
Appearance |
|
Black、Colours |
||
|
Hardness/shore A |
ATSM D2240 |
60±5 |
70±5 |
80±5 |
|
Tensile Strength/MPa |
ATSM D412 |
21.4 |
22.1 |
21.5 |
|
Elongation at break,% |
ATSM D412 |
323 |
234 |
193 |
|
Compression at set,200℃,70h |
ATSM D395 |
33.8 |
31.8 |
36 |
Note:
One stage vulcanization: 180°C @5min, two stage vulcanization: 230°C @4h.
Advantages:
The hose made of bonded fluororubber is suitable for high temperature resistance, oil resistance and special medium resistance, such as the use of aircraft fuel oil, high temperature hot air, thermal inorganic and other special media (chlorinated hydrocarbons and Other chlorides) transportation, guidance, etc. Wires and cables made of fluororubber have good flexibility and good insulation.
Application:
Adhesive type fluororubber is usually bonded with silicone rubber after vulcanization, and it is difficult to separate. It is suitable for making various oil-resistant and medium-resistant products such as automobile hoses.
How to use and precautions: Remix several times on the open mill, and then use the backmixed rubber out of the sheet or cut into the desired shape. This product should be kept neutral and avoid contact with acidic and alkaline substances. .
Storage method: store in a dry environment at room temperature, valid for one year.
Packing: This product is packed in polyethylene plastic bags in the form of film, 10 kg per bag, two bags per carton.
Transportation: This product is transported as a non-hazardous chemical. Avoid contact with pollution sources, sunlight, and water during transportation.
Hot Tags: adhesive type fluororubber, China adhesive type fluororubber manufacturers, suppliers, factory, thermal degradation fluoroelastomer, fluoroelastomer physical properties, fluoroelastomer wristband, Fluororubber for Oil Seal, fluorine rubber gasket, what is fluoroelastomer strap
You Might Also Like
Send Inquiry
